Ford Pristine Parts

Hardi Fuel Pumps

Car models

  • 12V

SPECIFICATIONS

Feeding capacity: 60-80l / h
Pressure in bar: 0.13-0.20
Starting voltage: 8,5-9,5V
Rated voltage: 12V
Current consumption: 1.5-1.9A
suction height: <1,5mtr.
Weight: approx. 900g
Spigot: 8mm swiveling

independent of the engine
easy to assemble
self-priming
last until -40 ° C
warm to + 80 ° C
unleaded petrol, diesel, methanol and ethanol containing fuels
Hydraulic performance of the pump adapts to consumption
For safety reasons, we strongly recommend the use of a safety shutdown during installation!

Supplied with: Clamp with rubber, screw & Mother; Manual

We strongly recommend using a fuel filter between the fuel tank and the fuel pump.

Models

  • ab 1700cc 6V
  • 124
  • Most Ford 12v models

 

SPECIFICATIONS

Delivery rate: 100-130 l / h
Pressure in bar: 0,28-0,35
Starting
voltage: 9,0-9,5V Nominal voltage: 12V
Current consumption: 1,5-1,9A Suction
height: approx. 1,5mtr.
Weight: 910g Neck
: 8mm moveable

suitable for engines over 100hp

Hardi fuel pumps pristine parts

Advantages of Hardi Fuel pumps

  • All HARDI-Pumps are self-priming
  • All HARDI-Pumps are interference-suppressed
  • All HARDI-Pumps are applicable for various fuels: premium-grade petrol, petrol, diesel, methanol- and ethanol containing fuels.
  • All HARDI-Pumps are available as 12 volt or 24 volt pumps. Particular models are also available with 6 volt.
  • All HARDI-Pumps are cold-resistant up to -40°C and heat-resistant up to +80°C.
  • All HARDI-Pumps are protected against corrosion, maintenance free and have a very long lifetime.
  • All HARDI-Pumps are easy to install.