Fiat Used Parts

Hardi Fuel Pumps

Car models

  • 500,600,850 bis 1968
  • 1000 Berlina

Specifications

Feeding capacity: 60-80l / h
Pressure in bar: 0.13-0.20
Starting voltage: 8,5-9,5V
Rated voltage: 12V
Current consumption: 1.5-1.9A
suction height: <1,5mtr.
Weight: approx. 900g
Spigot: 8mm swiveling

independent of the engine
easy to assemble
self-priming
last until -40 ° C
warm to + 80 ° C

unleaded petrol, diesel, methanol and ethanol containing fuels
Hydraulic performance of the pump adapts to consumption
For safety reasons, we strongly recommend the use of a safety shutdown during installation!

Supplied with: Clamp with rubber, screw & Mother; Manual

We strongly recommend using a fuel filter between the fuel tank and the fuel pump.

Hardi Fuel Pump 13312Hardi fuel pump 13312

Hardi Fuel Pump 13312

88.74

The Ses 13312 Hardi Fuel pump

Suitable for universal use and for each engine type
Easy to install (assembly instructions are enclosed)

Models

  • 124,125,127,128,130 ab 1966

 

Specifications

Feeding capacity: 80-100l/h
pressure in bar: 0,18-0,26
starting voltage: 9,0-9,5V
nominal voltage: 12V
current consumption: 1,5-1,9A
suction height: < 1,5m.
weight: 840g
nozzle: 8mm movable

suitable for engines up to 100hp

  • independent of the engine
  • easy to assemble
  • self-priming
  • cold resistant to -40°C
  • heat resistant up to +80°C
  • Gasoline unleaded, diesel, methanol and ethanol containing fuels eligible
  • Flow rate of the pump adjusts to the consumption

For safety reasons, we generally recommend the use of a safety shutdown during installation!

Supplied with: Clamp with rubber, screw & nut; operation manual

Hardi Fuel Pump 14412

Hardi Fuel Pump 14412

93.48

The electrical HARDI Fuel Pump is a diaphragm pump. Opposed to mechanical fuel pumps it has its own propulsion (an electric motor or a solenoid coil), which ensures a smooth functioning independent of the engine.

Models

  • 1600 S
  • Dino Coupe ab 1970

 

Specifications

Delivery rate: 100-130 l / h
Pressure in bar: 0,28-0,35
Starting
voltage: 9,0-9,5V Nominal voltage: 12V
Current consumption: 1,5-1,9A Suction
height: approx. 1,5mtr.
Weight: 910g Neck
: 8mm moveable

suitable for engines over 100hp

  • independent of the engine
  • easy to assemble
  • self-priming
  • cold resistant to -40°C
  • heat resistant up to +80°C
  • Gasoline unleaded, diesel, methanol and ethanol containing fuels eligible
  • Flow rate of the pump adjusts to the consumption

For safety reasons, we generally recommend the use of a safety shutdown during installation!

Supplied with: Clamp with rubber, screw & nut; operation manual

Hardi fuel pumps pristine parts

Advantages of Hardi Fuel pumps

  • All HARDI-Pumps are self-priming
  • All HARDI-Pumps are interference-suppressed
  • All HARDI-Pumps are applicable for various fuels: premium-grade petrol, petrol, diesel, methanol- and ethanol containing fuels.
  • All HARDI-Pumps are available as 12 volt or 24 volt pumps. Particular models are also available with 6 volt.
  • All HARDI-Pumps are cold-resistant up to -40°C and heat-resistant up to +80°C.
  • All HARDI-Pumps are protected against corrosion, maintenance free and have a very long lifetime.
  • All HARDI-Pumps are easy to install.